10" 1,000 Watt (RMS) DC2 Series Peak Power Car Subwoofer (1,000 Watts RMS/1,500 Watts Max)
SKU: DC2-10D2
Overview
Description
Get ready to crank the bass in your vehicle with Stinger Audio's DC series 2-OHM or 4-OHM, 10" subwoofers! With an RMS power rating of 1000-Watts and a 1,500-Watt peak power, these bad boys are engineered for a pulse-pounding performance and extraordinary sound experience. Their MLB collar technology ensures maximum strength while their fiber matrix paper cone body minimizes distortion and increases handling capability - all kept sturdy by CFL voice coil three times more structurally rigid than competitors' designs. Let this impressive woofer be the heart behind every bumpin' drive you take.
Features
-
CFL³ Technology Voice Coil: 3x more structurally rigid, prolonging the life of the voice coil.
-
MLB Collar Technology: enables micro-level bonding with cone & spider for increased strength.
-
Fiber Matrix Paper Cone: to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced in the subwoofer enclosure.
-
Linear Surround Technology: maximum excursion for that hard hitting, head shaking, feel-it-in-your-soul bass.
-
High-Density Wide Profile Compressed Foam Surround stitched to the cone delivering ultimate durability built to last no matter how hard you crank that music up.
-
Dual VC (vent-cap) Design: to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced within the subwoofer’s motor structure.
-
Magnetic FEA High-Efficiency Motor: provides the highest possible, efficient motor design.
-
Thermal Efficient Design Via a Vented Motor: providing better thermal efficiency, reduces motor compression, and extended low-frequency response.
-
Double Looped and Sleeved Lead Wires for High Excursion: reduces wire roping and allows high excursion, increased flexibility, and long life.
-
Push Type Terminals: provide consistent tension to the speaker wire preventing it from becoming loose from vibration.
-
Bent Edge Enhanced Frame: minimizes overall resonance and provides accurate sound with less distortion.
-
Linear Long Throw Spider Suspension: for increased output and power handling.
-
Black Anodized Voice Coil Former: Optimized heat dissipation for efficient performance.
-
High density ferrite magnet: Drives a higher magnetic flux to the motor for more powerful bass.
-
Dual Cap Topology (D.C.T.): Doubles the structure rigidity of the cone and dust cap to minimize distortion and for tight, articulate bass and the highest quality musical reproduction.
-
Cast Aluminum Frame: Ultimate Frame material - minimizes overall resonance and provides accurate sound with less distortion.
- Coupled Top Plate (C.T.P.): Extended magnet field gives the voice coil more control for linear sound reproduction.
What's in the Box
- 10" 1,500 Watt DC2 Series Peak Power Car Subwoofer
- User Guide
Specifications
|
MODEL |
DC210D2 | DC210D4 |
|
Nominal Impedance (Z) |
1.8 ohms | 3.2 ohms |
|
DC Resistance (Re) |
3.6 ohms | 6.4 ohms |
|
Resonance Frequency (Fs) |
29.4605 Hz | 27.6341 Hz |
|
Piston Area (Sd) |
0.0314 m2 | 0.0314 m2 |
|
Force Factor (BL) |
22.8048 T.m | 30.1647 T.m |
|
Mechanical Q Factor (Qms) |
7.8504 | 5.6696 |
|
Electrical Q Factor (Qes) |
0.3561 | 0.3275 |
|
Total Q Factor (Qts) |
0.3407 | 0.3096 |
|
Sensitivity 1W/M (SPL) |
82.1895 | 82.4295 |
|
Mechanical Compliance (Cms) |
0.1050 mm/N | 0.1237 mm/N |
|
Moving Mass (Mms) |
277.9171 g | 268.1933 g |
|
Linear Excursion (Xmax) |
16 mm | 16mm |
|
Volume Acoustic |
14.4725 Ltr | 17.0451 Ltr |
|
Compliance (Vas) |
0.511 cu ft | 0.602 cu ft |
|
Reference Efficiency (NO.) |
0.10% | 0.11% |
|
Nominal Power (Pe) |
1000 Watts | 1000 Watts |
|
Peak Power |
1500 Watts | 1500 Watts |
|
Frequency Response |
20-200 Hz | 20-200 Hz |
|
Voice Coil Diameter |
3 in/76.2 mm | 3 in/76.2 mm |
|
Displacement |
0.0889cu ft/ 2.517Ltr | 0.0889cu ft/ 2.517Ltr |
Support
Find the answers to many common questions:
*********************************
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.
