AudioControl DM-810 8 x 10 Channel Digital Signal Processor

Product Highlights

Features

• DM Smart DSP: The DM-810 includes a micro USB (Type-B) port to connect to a laptop (USB Type-A to micro-B cable included), allowing you to use the AudioControl's DM Smart DSP app. This is a fully featured Matrix DSP interface designed to give you control over every aspect of the processor. Features include routing any input to any output, gain adjustment, delay, polarity, and a 30-band EQ. High-pass, low-pass, and band-pass filtering can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. It also includes RTAs (Real Time Analyzer) for every input and output to easily identify and sum factory speaker signals for OEM integration.

• Maximum Input Level Control (MILC): The processor analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED glows red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will glow to indicate the gain, for that set of channels, is set to the optimum level.

• GTO (Great Turn On) Signal Sense: If you are connecting the DM-810 to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the processor when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the DM-810 will turn itself off.

• ACR-3 Remote: The optional AudioControl ACR-3 wired remote is a dual-function remote that lets you adjust both the level of the main and line outputs, as well as recalling memory presets, all from the driver's seat. The ACR-3 has two LED indicators and a rotary/push-knob. When the blue LED is on, the remote knob raises and lowers the output level. When the knob is pushed in, the red LED will light, allowing the knob to recall memory presets when turned.

• Options Port: The DM-810 includes a proprietary 10-pin Molex socket allowing use of AudioControl's optional Bluetooth adaptor. This allows audio streaming into channels 7 and 8 from a Bluetooth-enabled device.

• Top Panel: The top panel of the DM-810 has the labeling for all of the input/output connections, as well as the following LED indicators:

  • Power: If the amp is powering on correctly, this should be lit red.
  • USB Activity LED: This LED lights when there is USB activity between the amp and your computer during set up.
  • Maximized Input LEDs: These LEDs illuminate when a maximum audio signal is present on any of the analog audio inputs. Signal levels should be lowered if these LEDs are on a lot. Four LEDs are provided covering: Stereo 1/2, Stereo 3/4, Mono 5/6, and Stereo 7/8.
  • Maximized Output LEDs: These LEDs illuminate when there is maximum signal present on any of the audio outputs. Signal levels should be lowered if these LEDs are on a lot. Five LEDs are provided, one each for: Stereo 1/2, Stereo 3/4, Stereo 5/6, Stereo 7/8, and Mono 9/10.
  • MILC Source Clip LED: The MILC (Maximum Input Level Control) level-setting circuit prevents clipping and distortion. It calculates when the waveform of an incoming signal (on channels 1/2) is clipping and lights this LED. The level of the incoming signal should be set just prior to MILC LED coming on.
    
    

• Connections: The DM-810's connections are aligned along the front of the processor for ease of installation. These include:

  • Power/Ground: A removable 4-pin Phoenix (Euroblock) connector is provided for Power, Ground, Remote In, and Remote Out. The Remote Out will send a turn-on signal to other devices whether the DM-810 is using the Remote In or GTO Signal Sensing.
  • Speaker Level Inputs: Four 4-pin Phoenix connectors are used for speaker level inputs: Stereo 1/2, Stereo 3/4, Mono 5/6, and Stereo 7/8.
  • Line Level Inputs: Four pairs of RCA inputs are provided: Stereo 1/2, Stereo 3/4, Mono 5/6, and Stereo 7/8.
  • Digital Inputs: This section includes both Coax and Optical digital inputs.
  • Line Level Outputs: Five pairs of RCA line outputs are provided to run to outboard amp(s). These are: Stereo 1/2, Stereo 3/4, Stereo 5/6, Stereo 7/8, and Mono 9/10.
  • Options Port: Allows connection of AudioControl's optional Bluetooth adaptor.
  • ACR-3 Control: This RJ-14 telephone-type connection allows you to plug in the optional ACR-3 Remote. The ACR-3 is used to change the output level and for recalling memory presets.
  • USB: A micro-USB (Type-B) is used for connection to a computer for DSP configuration.

Description

Looking to take your car audio system to the next level? Look no further than the AudioControl DM-810 Digital Signal Processor - the ultimate tool for optimizing and customizing your sound experience on the road.

With 8 inputs and 10 outputs, this DSP provides unmatched flexibility and precision in shaping and fine-tuning your audio. Featuring advanced equalization, crossover, and time alignment capabilities, the DM-810 ensures that every note and beat is delivered with maximum clarity and power, making you feel like you're in the middle of the music.

But that's not all - the DM-810 also boasts a powerful 32-bit SHARC processor, enabling it to process high-resolution audio files up to 24-bit/192kHz. And with its compact and durable design, this DSP is easy to install and built to last.

Whether you're a music enthusiast or a professional audiophile, the AudioControl DM-810 Digital Signal Processor is the ultimate tool for achieving the perfect sound. So why settle for subpar audio quality when you can experience the power and precision of the DM-810? Upgrade your car audio system today and take your listening experience to the next level!

What's in the Box

• Digital Signal Processor
• 119" USB cord (Type-A on one end / micro type-B on other end)
• User Guide 

Specifications

Support

Find the answers to many common questions:

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.