














Overview
Description
Stinger Audio DC Series single 10-inch subwoofer provides a conservatively rated 1,000-watts RMS of bass. The subwoofer is intact with MLB collar technology, enabling micro-level bonding with cone and spider for increased strength. The fiber matrix paper cone is designed to strengthen the rigidity of the woofer's cone body to minimize distortion while increasing the handling of the high pressure produced by the subwoofer enclosure.Features three times more structurally rigid CFL technology voice coil, which prolongs the voice coil's life. Engineered for heart-pounding performance and a breathtaking sound experience. Looking to add some significant bass to your vehicle? Then these DC series subwoofers are for you.
Features
- 10-inch dual 2-ohm or 4-ohm subwoofer
- Car subwoofer with 1,000RMS power and 1,500 max power
- CFL³ Technology Voice Coil: 3x more structurally rigid, prolonging the life of the voice coil
- MLB Collar Technology: enables micro-level bonding with cone & spider for increased strength
- Fiber Matrix Paper Cone: to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced in the subwoofer enclosure
- Linear Surround Technology- for high excursion
- High-Density Wide Profile Compressed Foam Surround stitched to the cone
- Dual VC (vent-cap) Design: to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced within the subwoofer’s motor structure
- Magnetic FEA High-Efficiency Motor: provides the highest possible, efficient motor design
- Thermal Efficient Design Via A Vented Motor: providing better thermal efficiency, reduces motor compression, and extended low-frequency response
- Double Looped and Sleeved Lead Wires for High Excursion: reduces wire roping and allows high excursion, increased flexibility, and long life
- Push Type Terminals: provide consistent tension to the speaker wire preventing it from becoming loose from vibration
- Bent Edge Enhanced Frame: minimizes overall resonance and provides accurate sound with less distortion
- Linear Long Throw Spider Suspension: for increased output and power handling
What's Included
- Single 10" 1,500 Watt DC Series Peak Power Car Subwoofer
- Install Guide
Specifications
Model Number | DC Series 10-Inch Subwoofers |
Type | Car Subwoofer |
Cone Type | Fiber Matrix Paper Cone |
RMS Power Handling | 1,000 Watts |
Peak Power | 1,500 Watts |
Surround Type | High Roll Foam Surround |
Subwoofer Size | 10-inch |
Voice Coil Size | 3" Copper |
Magnet Slug Count | Double |
Voice Coil Layers | 4 |
Voice Coil Material | Copper |
Voice Coil Impedance | Dual 2Ω or 4Ω |