Overview
Description
Description
Stinger Audio engineered the MC1 series single 12-inch subwoofer to help redefine the everyday subwoofer, delivering more bass for your buck. The Stinger Audio MC1 series subwoofer line provides a 2.5" coil which allows for peak performance. The subwoofer features a CFL technology voice coil which is 3 times more structurally rigid to help prolong the life of the voice coil. MC series subwoofers were designed as an entry-level subwoofer that is conservatively rated at 700-watt RMS and available in 2-OHM and 4-OHM impedance. The MC series subwoofers can operate at peak performance for hours on end with peace of mind knowing that it can handle all that bass.
Features
- CFL³ Technology Voice Coil: 3x more structurally rigid, prolonging the life of the voice coil
- MLB Collar Technology: Enables micro-level bonding with cone & spider for increased strength
- Fiber matrix paper cone to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced in the subwoofer enclosure
- Linear Surround Technology: Maximum excursion for that hard hitting, head shaking, feel-it-in-your-soul bass
- High-Density Wide Profile Compressed Foam Surround stitched to the cone delivering ultimate durability built to last no matter how hard you crank that music up
- Dual VC (vent-cap) Design: to strengthen the rigidity of the woofer’s cone body to minimize the distortion while increasing the handling of high pressure produced within the subwoofer’s motor structure
- Magnetic FEA High-Efficiency Motor: Provides the highest possible, efficient motor design
- Thermal Efficient Design via Vented Motor: Driving better thermal efficiency, reduces motor compression, and extended low-frequency response
- Double Looped and Sleeved Lead Wires for High Excursion: Reduces wire roping and allows high excursion, increased flexibility, and long life
- Push Type Terminals provide consistent tension to the speaker wire preventing it from becoming loose from vibration
- Bent Edge Enhanced Frame: Minimizes overall resonance and provides accurate sound with less distortion
- Linear Long Throw Spider Suspension: For increased output and power handling
- High density ferrite magnet: Drives a higher magnetic flux to the motor for more powerful bass
- Dual Cap Topology (D.C.T.): Doubles the structure rigidity of the cone and dust cap to minimize distortion and for tight, articulate bass and the highest quality musical reproduction
What's Included
- 12" MC Series 1,200 Watt Peak Power 2-OHM or 4-OHM Subwoofer
- User Guide
Specifications
|
MODEL |
MC112D2 | MC112D4 |
|
Nominal Impedance (Z) |
1.8 ohms | 3.2 ohms |
|
DC Resistance (Re) |
3.6 ohms | 6.4 ohms |
|
Resonance Frequency (Fs) |
39.7370 Hz | 40.5708 Hz |
|
Piston Area (Sd) |
0.0471 m2 | 0.0471 m2 |
|
Force Factor (BL) |
16.2026 T.m | 20.1450 T.m |
|
Mechanical Q Factor (Qms) |
7.3694 | 6.2464 |
|
Electrical Q Factor (Qes) |
0.715 | 0.7583 |
|
Total Q Factor (Qts) |
0.6517 | 0.6762 |
|
Sensitivity 1W/M (SPL) |
85.2287 | 85.5047 |
|
Mechanical Compliance (Cms) |
0.0768 mm/N | 0.0816 mm/N |
|
Moving Mass (Mms) |
208.8276 g | 188.6377 g |
|
Linear Excursion (Xmax) |
13 mm |
|
Volume Acoustic |
23.8399 Ltr | 25.3179 Ltr |
|
Compliance (Vas) |
0.842 cu ft | 0.894 cu ft |
|
Reference Efficiency (NO.) |
0.20% | 0.21% |
|
Nominal Power (Pe) |
700 Watts |
|
Peak Power |
1200 Watts |
|
Frequency Response |
20-200 Hz |
|
Voice Coil Diameter |
2.5 in/63.5 mm |
|
Displacement |
0.0885 cu ft/ 2.506 Ltr |
Support
Find the answers to many common questions:
*********************************
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.
