AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier
AudioControl LC-1.1500 Mono Subwoofer Amplifier

AudioControl LC-1.1500 Mono Subwoofer Amplifier

$899.00
/

SKU: LC-1.1500

Only 650 items in stock!
Product Highlights

Description

Now available on Stinger Off-Road, the ultimate subwoofer amplifier for car audio enthusiasts - AudioControl's LC-1.1500 Mono Subwoofer Amplifier! This powerhouse is engineered to deliver a staggering 850 watts RMS x 1 at 4 ohms and an earth-shaking 1,500 watts RMS x 1 at 2 ohms.

But that's not all! The LC-1.1500 comes equipped with a variable low-pass filter that ranges from 30-230 Hz and features a 24 dB/octave slope. This means you can fine-tune the bass to perfection and enjoy a seamless transition between your subwoofer and full-range speakers.

The LC-1.1500 also features AudioControl's signature GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input. This means you won't have to worry about running a separate remote wire from your head unit to the amp - the LC-1.1500 will turn on automatically when it detects a signal from your speaker-level inputs.

Whether you're looking to build a ground-shaking competition system or simply want to add some serious bass to your daily driver, the AudioControl LC-1.1500 Mono Subwoofer Amplifier is the perfect choice. Don't settle for anything less than the best - upgrade your car audio system today!

Features

  • AccuBASS: The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: Threshold lets you dial in the level at which the AccuBASS will begin to work, while the Level control raises or lowers the level of AccuBASS compensation. A slide switch allows the AccuBass feature to quickly be Enabled or Disabled.

  • ACR-1 Remote: The optional AudioControl ACR-1 wired remote (sold separately) lets you adjust the subwoofer output level from the driver's seat. The remote level control comes with a 20' cable, terminating in an RJ-14 jack that plugs into the amp, and is designed to be mounted under a dash for easy access while driving.

  • Maximum Input Level Control (MILC): The amplifier analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED lights red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will light to indicate the gain is set to the optimum level.

  • GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo or an aftermarket unit without a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off. An On/Off slide switch is provided on the amp activate the GTO Signal Sense feature.

  • Connections: The LC-1.1500 features the following connections:

    • Power / Ground / Turn-on: The amp features set screw terminals for the +12V, ground, and turn-on leads. The power and ground terminals will accommodate up to 1/0 AWG wire. The terminals can be tightened/loosened with a Phillips-head screwdriver (not included). The manufacturer recommends 0- to 2-gauge wire. A 160A fuse should be placed on the power wire within 18" of the positive battery terminal. The set screw turn-on lead terminal will accept up to 8-gauge wire and requires a Phillips-head screwdriver. Typically, an 18-gauge wire is sufficient for the remote turn-on lead.
    • Line Inputs: A pair of RCA jacks is provided for connecting the amp to the source unit.
    • Speaker Level Input: A 4-pin Euroblock (or Phoenix) connector is provided for the speaker-level input. The connector can be removed for easier wiring. The screw terminals on the connector require a small Phillips-head screwdriver. The left and right audio signals are summed internally to produce a mono subwoofer signal.
    • Speaker Outputs: Four set-screw terminals are provided to connect the amp to the subwoofer, or multiple subwoofers. The combined speaker impedance should not dip below 2 ohms. The terminals are wired internally in parallel.
    • Level Control: The optional ACR-1 remote control plugs into the provided RJ14 terminal.

     

  • Controls: The LC-1.1500's controls are located under a protective panel that can easily be removed with the included 2.5mm Allen key. A flat-head screwdriver (not included) is needed to adjust the rotary controls which include the AccuBass and GTO settings, a Low-Pass crossover with a range from 30 Hz to 230 Hz, a Polarity switch with 0 or 180, and LED indicators for Power and Protection.

What's in the Box

  • Mono Subwoofer Amplifier
  • Four 40A ATO fuses (installed)
  • 2.5mm Allen wrench
  • User Guide 
Specifications

RMS Power Output 

850 Watts x 1

Power at 2 Ohms

1500 Watts x 1

Minimum Impedance 

2 ohms

Frequency Response

10 Hz – 30 kHz

Signal-to-Noise Ratio

102 dB

THD

< 0.01%

Input Voltage

14.4v

Low-Pass Crossover Frequency

30-230 Hz

Width

11.94"

Height

2.13"

Depth

8.06"


Support

Find the answers to many common questions:

 

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.