System Configuration Flexibility of 4ch 3ch or 2ch with 400 watts of power
RX2 400.4 is a powerful 4ch 400W, class A/B amplifier delivering massive power to support your system’s needs. Configure as a 4ch for an active components setup or as a front/rear stage amplifier. How about for a full system? Setup as 3ch mode you can run your front stage and a subwoofer. Configure in 2ch mode for 200 watts x2 on whatever you choose. Anyway you configure it, you will be rewarded with efficient sound and musical quality while wrapped in a sleek, low profile chassis designed for versatility.
RX2 series amplifiers are the reference for style and value in any installation. Built with the legendary Phoenix Gold reliability, they feature heavy duty heatsinks, robust unregulated power supplies, and oversized direct input power and speaker terminals. They also sound sweet thanks to the audiophile-grade output transistors. We made upgrading your stock system easy by allowing high level inputs, so you can keep that hard to replace radio, and still upgrade the sound. RX2-series amplifiers are ready to impress with their effortless ability to provide power and clarity while keeping the chassis at a convenient size for any installation. The devil is in the details, so it just made sense that we allow the PG name plate to be removed and turned to match the orientation you might need for your install because we know you're going to want show off your system and make all your friends jealous.
- Class A/B Topology
- High-level Inputs for Easy OEM Integration
- Small Footprint Chassis Design
- Robust Unregulated Power Supplies: Automotive grade, High Current MOSFETs with high amperage capability and heat tolerance.
- Audio Precision® Quality Control Verification
- Balanced Flow Dissipation (BFD): Component layout and chassis design are optimized to evenly distribute heat across the entire chassis, avoiding hotspots and increasing thermal efficiency.
- Direct Insert Power and Speaker Terminals: Decreased resistance for higher power transfer and efficiency
What's In The Box
RMS Power Ratings listed at less than 1% THD @ 14.4v
|Number of Channels:||4|
|4Ω: CH 1 - 4||75W x 4|
|2Ω: CH 1 - 4||100W x 4|
|2CH Mode: 1+2 4Ω Bridged & 3+4 4Ω Bridged||200W x 2|
|3CH Mode: 1/2 4Ω Stereo & 3+4 4Ω Bridged||75W x 2 + 200W x 1|
|3CH Mode: 1/2 2Ω Stereo & 3+4 4Ω Bridged||100W x 2 + 200W x1|
|Total RMS Power (Sum of rated power):||400W|
|CH 1 - 4||50Hz - 200Hz @ 12dB / Oct Linkwitz Riley|
|Input Channels:||4CH F/R, 3 CH FRONT, 2 CH FRONT|
|Input Mode:||Unbalanced / Balanced|
|Processing:||Bass Boost 0dB / +6dB / +12dB @45hz|
|Input Sensitivity:||.2v - 6v Unbalanced RCA Low-Level|
|.5v - 15v Balanced Hi-Level Harness|
|Signal to Noise (@ CEA Standard):||>80dB|
|Frequency Response: Full Range||CH 1 - 4 10Hz - 40kHz|
|Heatsink Type:||Extruded Aluminum|
|Operating Voltage:||8V to 16V|
|Switchable Auto-Turn On:||No|
|Power Supply Type:||Unregulated|
|Power TerminalS:||4 Gauge|
|Speaker Terminal:||10 Gauge|
|On Board Fusing:||2 x 30A ATC|
|Recommended Inline Fuse:||50A|
|Dimensions (L x W x H):||15.74” x 8.11” x 1.98” - 400mm x 206mm x 50.5mm|
Find the answers to many common questions:
Warranty Information - Radio Replacement Kits & Bundles
Stinger Off-Road Radio Kits are warrantied against defects in materials One (1) Years from purchase date. Stinger Off-Road will, at its discretion, repair or replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warrant