Overview
Everything You need to Add Bass to Your Wrangler JL Unlimited
Get ready to transform your JLU's audio with crisp and clear, goose bump-inducing bass. Your music will have depth, letting your feel every heart-pounding beat and experience it like the artist intended.
WHAT'S INCLUDED
- Swing gate-mount 12" subwoofer loaded enclosure for Jeep Wrangler JLU
- 800w monoblock amplifier low-profile amplifier
- Jeep Wrangler 4GA wiring kit
- Jeep Wrangler JL Unlimited amplifier mounting system
WHY THIS WRANGLER JL UNLIMITED SUBWOOFER UPGRADE
Designed for your JLU to add bass but not bulk. Your swing gate-mount loaded and closure and amplifier are designed specifically for your JLU, giving you the music experience you deserve without giving up space.
FEATURES
Swing Gate-Mount Loaded Enclosure
Extreme Bass
Push your Jeep's bass to the limit. Experience clean, articulate, goose bump-inducing bass; jam-packed with every musical detail
Space-Saving Fit
Engineered to overcome the lack of space hurdle where space is a premium, without compromising power and sound quality
Weather-Resistant
Designed to withstand harsh outside elements including water, dirt, dust, and debris
800W Monoblock Amplifier
Class-D Topology
Small Footprint Chassis Design
Robust Unregulated Power Supplies: Automotive grade, High Current MOSFETs with high amperage capability and heat tolerance.
Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Audio Precision® Quality Control Verification Balanced Flow Dissipation (BFD): Component layout and chassis design are optimized to evenly distribute heat across the entire chassis, avoiding hotspots and increasing thermal efficiency.
Balanced/Unbalanced Inputs: Provides input matching flexibility for noise rejection from source signal components.
Direct Insert Power and Speaker Terminals: Decreased resistance for higher power transfer and efficiency
| Number of Channels: | 1 |
| 4Ω: CH 1 | 350W x 1 |
| 2Ω: CH 1 | 520W x 1 |
| 1Ω: CH 1 | 800W x 1 |
| Total RMS Power (Sum of rated power): | 800W |
| Bridgeable: | NO |
| Crossover Mode: | LP |
| CH 1 | 50Hz - 250Hz @ 12dB / Oct Linkwitz Riley |
| Subsonic | 10Hz - 55Hz @ 12dB / Oct Linkwitz Riley |
| Input Channels: | 2CH L/R |
| Input Mode: | Switchable Unbalanced / Balanced |
| Input Sensitivity: | .2v - 5v Unbalanced RCA Low-Level |
| .5v - 10v Balanced RCA Hi-Level | |
| Processing: | Bass Boost 0 - +18dB @45hz |
| Variable Phase 0 - 180 Degrees | |
| Output Channels: | Pass Through from Input Signal |
| Signal to Noise (@ CEA Standard): | >90dB |
| Frequency Response: Full Range | CH 1 15Hz - 250Hz |
| Topology Class: | D |
| Heatsink Type: | Extruded Aluminum |
| Cooling Type: | Radiation |
| Operating Voltage: | 8V to 16V |
| Switchable Auto-Turn On: | No |
| Power Supply Type: | Unregulated |
| Power Terminals: | 4 Gauge |
| Speaker Terminal: | 10 Gauge |
| On-Board Fusing: | 3 x 30A ATC |
| Recommended Inline Fuse: | 80A |
| Dimensions (L x W x H): | 10.16” x 5.91” x 1.91” - 258mm x 150mm x 48.5mm |
Amplifier Mounting System
Fits 2018-2023 Jeep Wrangler JL Unlimited (4-Door)
- Designed to mount under the driver side or passenger side seat
- Predrilled and threaded amplifier mounting holes with supplied hardware
- Compatible with AudioControl, Phoenix Gold, and Stinger Amplifiers
- Can be used to mount any amplifier or other Jeep accessories under the driver side or passenger side seat
- Uses the rear legs of the seat to secure the bracket into position
Stinger Audio's Vehicle-Specific kits make shopping for your Wrangler easier than ever, car audio designed for the audiophiles who crave premium car audio with the convenience of plug-n-play installation.
