Bass Restoration: Rather than simply turning up the bass, the patented bass restoration circuit takes a full range input signal and measures the upper harmonics of the bass frequency range to determine what frequencies have been lost during the recording process, then correctly restores the missing bass information. The remote rotary knob allows you to control how much bass is restored to the system. A full-range signal from the Epicenter can feed a full-range amp, a subwoofer amp (with built-in crossover), or an outboard crossover.
Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. The center frequency is continuously variable from 27 Hz to 63 Hz. The width of the band is also adjustable.
Bass Maximization: The Bass Maximization circuit allows The Epicenter to maximize the bass output of any system while restraining destructive bursts, which can damage speakers. The 5.0 volt factory setting can be changed to 2.5, 7.5, or 10 volts if the amplifier and speakers can handle it.
Remote: The bass restoration level is adjusted using the included wired remote. The remote is designed to be dash mounted within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed, and the knob and LED can be custom mounted through the dash.
Subsonic Filter: The subsonic filter crossover point is 33 Hz; it's governed by a replaceable chip, so it can be changed to 20, 25, 30, 35, 40, or 45 Hz.
Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the Epicenter and the source unit. The inputs can be set to balanced or unbalanced if needed.
Ground Isolation: The power supply ground is switchable in case of ground loop noise. The factory position is fully isolated (typically the best choice) but can be changed to Ground or 200Ω.
Terminal Block: The power/ground/remote terminal is removable; the wiring is attached to the block, then the block is plugged into the Epicenter.
Get ready to experience the bass like never before with AudioControl's The Epicenter Bass Booster Expander & Bass Restoration Processor! This sleek and stylish white device is the perfect addition to any car audio system, providing you with the ultimate control over your music.
Featuring an output impedance of 150 OHM, this powerful device delivers crystal-clear sound with deep, impactful bass that will make your music come alive. The Epicenter's advanced bass restoration technology is designed to restore the low-frequency information lost in compressed music files or factory sound systems, giving you the powerful, dynamic bass your music deserves.
But that's not all - The Epicenter also includes a built-in bass maximizer that allows you to adjust the intensity of your bass so you can fine-tune your sound to perfection. And with the included remote control, you can adjust on the fly without ever taking your eyes off the road.
Whether cruising down the highway or jamming out in the parking lot, The Epicenter Bass Booster Expander & Bass Restoration Processor is the perfect choice for any music lover who demands the best. So why settle for ordinary sound when you can have the epic sound of the Epicenter? Order yours today and experience the ultimate in-car audio performance!