AudioControl ACX-3.2 All-Weather Equalizer & Crossover with Paging Mic

Overview

Description

Are you a food truck owner looking to take your culinary creations to the next level? Or are you just needing to get people's attention without straining your voice? Look no further than the AudioControl ACX-3.2 All-Weather Equalizer & Crossover!

This versatile powerhouse of an equalizer is perfect for anyone looking to pump up the jams while serving up delicious eats or call out instructions while driving a boat. With its 2-channel input and 4-band graphic EQ, you'll be able to fine-tune your sound and get the perfect balance of bass, midrange, and treble.

But that's not all – the ACX-3.2 also features a paging mic that lets you make announcements without missing a beat. Whether you're announcing today's specials or reminding customers to save room for dessert, the paging mic is your ticket to keeping everyone in the loop.

And of course, the ACX-3.2 is built to withstand even the toughest conditions. Whether you're cooking up a storm in the blazing sun or serving up snacks in a downpour, this all-weather equalizer has got you covered.

So if you're ready to take your business to the next level, don't settle for less. The AudioControl ACX-3.2 All-Weather Equalizer & Crossover is the only choice. 

Features

• Controls:

  • 3-Band Graphic EQ: Three rotary knobs let you adjust the signal +/-12 dB at 125 Hz, 1.25 kHz, and 10 kHz. There's an indent at each knob's center position so it's easy to return to the flat setting.
  • Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. Like the three graphic EQ bands, the adjustment range is +/-12 dB; the center frequency is continuously variable from 40 Hz to 80 Hz.
  • Equalize: A push-button is used to activate the EQ section; when Off, the EQ will be bypassed.
  • Crossover: The ACX-3.2 has a built-in high-pass/low-pass crossover with dedicated On/Off switch on top of the processor. A corresponding frequency dial lets you select the cutoff frequency with a range of 30-300 Hz. The Linkwitz-Riley crossover has a 24 dB/octave slope. When the crossover On/Off switch is On, high-pass frequencies are applied to the front and rear line outputs while the low-pass is applied to the subwoofer output. If the crossover is Off, a full range signal will be sent to the front and rear outputs and the subwoofer output will still be crossed over at the selected cutoff point.
  • Volume: If you choose, you can adjust the system volume using the ACX-3.2's volume knob. This allows you to leave the source volume at it's maximum un-clipped level, resulting in the best signal to noise ratio and dynamic range output from the source.
  • Subwoofer Level Control: The relative subwoofer volume is adjusted using the rotary Sub Level control on the front panel.
  • Fader: Because there is only one stereo line input and both front and rear line outputs, the front panel fader knob is needed to adjust the relative front and rear volume.
  • Input Level & Indicator: The input signal level for the left and right channels is set using the Level dial, providing 0 dB to +20 dB of gain. A corresponding Maximized LED starts to flicker as you reach the maximum unclipped voltage.
    
    

• PTT Microphone: The ACX-3.2 includes a hand-held Push-to-Talk microphone that lets you communicate through either the front or front & rear outputs. The paging feature is ideal for communicating with wakeboarders or other boaters, food truck order paging, or keeping in touch with other riders while off-roading. A rear-panel Mic Gain dial lets you adjust the signal balance between the mic and your audio.

• Line Driver: To achieve the best possible signal to noise ratio and dynamic range, the built-in line driver can increase the head unit's output voltage up to 20 dB (up to 7 volts RMS/9.5 volts peak).

• Connections:

  • Audio Inputs: A single pair of RCA jacks provides the signal input for the processor.
  • Audio Outputs: Three pairs of RCA jacks (Front, Rear, and Subwoofer) provide the outputs for running to outboard power amplifiers.
  • Terminal Block: The power/ground/remote/illumination connections terminate in a removable terminal block that plugs into the rear of the processor and can accommodate wire up to 16-gauge.
    
    

• Additional Settings: Four jumper settings can be accessed by removing the top cover of the ACX-3.2.

  • Balanced Input: Using the balanced differential input circuit may cancel noise picked up in the transmission line between the ACX-3.2 and the source unit. Options inlcude Balanced (default) and Unbalanced.
  • Mic Signal Rounting: Determines if microphone siganls are fed to the Rear Outputs (default) or Front & Rear Outputs.
  • Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.
  • Illumination: The outer ring of each knob is lit whenever the illumination terminal is energized. The color is switchable between blue and red. The illumination wire can be connected to a factory dash light dimmer, letting you dim the illumination on the processor along with the dash lights.
    
    

• Mounting: The Audio Control ACX-3.2 includes two mounting brackets that allow the processor to be mounted on top of or underneath a console or dash. The PTT microphone also includes a mounting bracket, letting you keep the mic within easy reach.

What's In The Box

• All-weather sound processor
• PTT Microphone with attached 4.5' coiled-cable
• 4-Pin terminal block (installed)
• 2 Mounting brackets
• Mic mounting bracket
• Four 1/8" screws
• Two 3/8" screws
• User Guide 

Specifications

Support

Find the answers to many common questions:

*********************************

Warranty Information

We have a 30-day easy return policy for all purchases. 

We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.

Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.

Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.

Note: Products purchased from unauthorized dealers are not covered under warranty.

Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.