Overview
Description
Introducing the AudioControl Epicenter Bass Restoration Processor with Remote Bass Level Control, now available in the Mexico Edition. This powerful device is designed to enhance the bass output of your car audio system, providing you with a more dynamic and immersive listening experience.
With the Epicenter Bass Restoration Processor, you can restore the low-end frequencies often lost in compressed digital music files, giving your music a fuller, richer sound. The device features a built-in bass maximization circuit, which allows you to adjust the frequency response and control the level of the bass output.
The Mexico Edition of the Epicenter Bass Restoration Processor comes with a remote bass level control, allowing you to adjust the bass output from the comfort of your driver's seat. This feature is handy for tuning the bass levels to match different music genres or compensate for different listening environments.
The Audio Control Epicenter Bass Restoration Processor is also designed with advanced processing technology, including high-quality signal processing algorithms and a variable bass boost control, which allows you to adjust the bass response to your specific preferences. The device is easy to install and can easily be integrated into most car audio systems.
Features
-
Bass Restoration: Rather than simply turning up the bass, the patented bass restoration circuit takes a full range input signal and measures the upper harmonics of the bass frequency range to determine what frequencies have been lost during the recording process, then correctly restores the missing bass information. The remote rotary knob allows you control how much bass is restored to the system. A full range signal is output from the Epicenter that can feed a full range amp, a subwoofer amp (with built-in crossover), or an outboard crossover.
-
Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. The center frequency is continuously variable from 27 Hz to 63 Hz. The width of the band is also adjustable.
-
Bass Maximization: The Bass Maximization circuit allows The Epicenter to maximize the bass output of any system while restraining destructive bursts, which can damage speakers. the 5.0 volt factory setting can be changed to 2.5, 7.5, or 10 volts if the amplifier and speakers can handle it.
-
Remote: The bass restoration level is adjusted using the included wired remote. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash.
-
Subsonic Filter: The subsonic filter crossover point is 33 Hz; it's governed by a replaceable chip, so it can be changed to 20, 25, 30, 35, 40, or 45 Hz.
-
Balanced Inputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the Epicenter and the the source unit. The inputs can be set to balanced or unbalanced if needed.
-
Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.
-
Terminal Block: The power/ground/remote terminal is removable; the wiring is attached to the block, then the block is plugged into the Epicenter.
What's In The Box
- Pre-amp Bass Restoration Processor (white)
- Remote dash mount control
- 20' RJ-14 cable
- User Guide
Specifications
|
Maximum Input Level |
15 volts RMS |
|
Maximum Output Level |
9.5 volts RMS/13 volts peak |
|
Frequency Response |
10 Hz-100 kHz;±1dB |
|
THD |
0.003% |
|
Signal-to-Noise Ratio |
130dB |
|
Input Impedance |
10,000 ohms |
|
Output Impedance |
150 ohms |
|
Balanced Input Noise Rejection |
>60 dB |
|
Width |
8" |
|
Height |
1.2" |
|
Depth |
5.5" |
|
Weight |
1.7 lbs (0.8 kg) |
Support
Find the answers to many common questions:
*********************************
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.
