Overview
Description
Are you tired of mediocre sound in your car? Upgrade to the ultimate audio performance with the AudioControl LC6i 6 Channel Line Out Converter! This powerful device is the perfect tool for audiophiles who demand the best possible sound quality from their car's audio system.
Featuring three pairs of inputs that can accommodate up to 400 watts of power, the LC6i gives you the flexibility to connect to any audio system. And with its advanced internal summing technology, this device sums up the audio signal from each input, ensuring that you get a clean, accurate signal that sounds just like the original recording.
But that's not all - the LC6i also features AudioControl's patented AccuBASS® technology, which automatically corrects the bass response in your audio system, ensuring that your music always sounds balanced and natural. And with its high-current, low-impedance output stage, this powerful device delivers crystal-clear sound with deep, impactful bass that will make your music come alive.
Designed with AudioControl's signature attention to detail and quality, the LC6i is the perfect addition to any car audio system. And with AudioControl's GTO™ Signal Sense circuitry, the LC6i will automatically turn on and off with your factory radio, so you don't have to worry about draining your car's battery.
So if you're ready to experience the ultimate in audio performance, upgrade to the AudioControl LC6i 6 Channel Line Out Converter today! With its advanced features and unparalleled sound quality, it's the perfect choice for any audiophile who demands the best.
Features
-
Speaker Input: The speaker level inputs are compatible with nearly any factory stereo system, even most Bose systems. There are 3 pair of inputs that will accommodate up to 400 watts.
-
Channel Summing: The LC6i has the ability to sum together multiple input channels (4 or 6) from the factory source unit into 2 channels. This is handy when the factory system has multiple, actively crossed-over signals sent from the OEM source unit or amplifier(s). For example, in some vehicles there is an actively crossed-over tweeter, midrange, and woofer all in the front of the vehicle. The LC6i lets you take all of those signals and sum them together to get a high-quality, full-range, pre-amp signal without the use of any additional cables or hardware.
-
AutoMode Inputs: When there is no signal present at the channel 3 input, the channel 2 input automatically feeds the channel 2 and channel 3 outputs.
-
Output Level: The +/- 12 dB output level allows you to adjust the head unit's voltage to the top of your amp's input range; up to 9.5 volts RMS. Each of the three pair of RCA outputs has its own level adjustment.
-
Auto Turn-on: The main speaker level input has a signal sensing circuit; the unit turns on when there's a speaker level input signal and turns off when the signal disappears.
-
Remote Output: The +12 volt DC remote output will trigger an amp to turn on whenever the LC6i is on. The remote's maximum current output is 1 amp.
-
Optional Sub Level Control: With the addition of an optional wired remote (sold separately), you can easily adjust the output level of channel 3, often used for a subwoofer.
-
Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.
-
Terminal Blocks: The power/ground/remote in/remote out terminal and the speaker level input terminals are removable; the wiring is attached to the block, then the block is plugged into the LC6i. The terminal blocks will accommodate wire up to 12 gauge.
What's In The Box
- 6-Channel line output converter (black)
- User Guide
Specifications
|
Maximum Speaker Level Input |
400 watts per channel @ 4 ohms |
|
Maximum Preamp Output |
9.5 volts RMS |
|
Frequency Response |
10Hz-22kHz |
|
THD |
0.01% |
|
Input Impedance |
20,000 ohms |
|
Output Impedance |
150 ohms |
Support
Find the answers to many common questions:
*********************************
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at absolutely no cost to you. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger Off-Road products are warrantied against defects in materials One (1) Year from purchase date. Stinger Off-Road will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.
